Regulator Package: MTX-R + Miflex Gauges + BCD Hose

There are cold-water regulators, and then there is the Apeks MTX-R. Developed from the MTX — a regulator built in direct collaboration with the United States Navy Experimental Dive Unit for extreme cold-water testing — the MTX-R brings that same military-grade engineering pedigree to recreational diving. The "M" stands for Military. The "R" stands for recreational. The result is one of the most capable cold-water regulators available to consumer divers anywhere in the world. Paired with the Miflex Black Faced Tech SPG and a Miflex BCD hose, this package gives you a complete, battle-hardened breathing system ready to connect straight to your existing rig. At the heart of the package is the Apeks MTX-R Regulator Set, designed and manufactured in the UK. The first stage is built around a breakthrough over-moulded endcap and environmental diaphragm — an innovative design that prevents ice build-up in extreme cold, the primary cause of first-stage free-flows in near-freezing water, while also protecting the first stage from impact damage. A ribbed diaphragm clamp adds further heat exchange performance, and the unique over-balanced diaphragm design delivers increasing medium pressure gas at a faster rate than ambient as you descend, giving you superior breathing at depth. Five medium-pressure ports — including a fifth with a protective bumper when not in use — and two angled high-pressure ports provide full flexibility for hose routing and transmitter fitting. A double swivel hose adds freedom of movement, and an easy one-hand-release DIN handwheel or over-moulded yoke handwheel makes tank changes straightforward even in thick gloves. Nitrox and oxygen compatible up to 40% O2, and fully tested for octopus use to EN250A at 60 metres in cold water. The second stage is equally well considered — an oversized breathing effort adjuster and large self-flushing purge button are both designed for use with gloves on, while large elastomer bumpers protect the most vulnerable points from impacts and scratches. A patented heat exchanger draws in the warmth of ambient water to offset the cold caused by gas expansion, delivering a noticeably more comfortable breathe in cold conditions. The reversible design accommodates left or right-hand gas supply, and a flexible nylon braided hose, double swivel and Comfo-bite mouthpiece complete a second stage engineered for serious, repeated use. No single-use plastic in the packaging. Completing the breathing system is the Apeks MTX-R Octopus , built to the same exacting cold-water standard as the primary second stage. Highly visible and straightforward to operate, it provides a reliable backup air source your buddy can reach for with confidence. Connecting your regulator to your BCD is the Miflex Xtreme BCD Hose , fitted with a standard 3/8" quick-release coupler suitable for most BCDs, wings and drysuits. Flexible, lightweight and flow-rate tested to EN 1809:2014 standards, it routes cleanly and reliably across any setup. Finally, choose your gauge setup: Miflex SPG fitted with 80cm Carbon HD hose : lightweight, compact and uncomplicated Miflex  Double Console with Depth Gauge and SPG : pressure gauge + depth gauge in a compact, easy-to-read console Package includes: Apeks MTX-R Regulator Set (First Stage, Second Stage + Octopus) Miflex  SPG or Double Console Miflex Xtreme BCD Hose Why you'll love it: Developed from the MTX — a regulator built to US Navy Experimental Dive Unit extreme cold-water specifications Breakthrough over-moulded endcap and environmental diaphragm actively prevents ice build-up in near-freezing water Over-balanced diaphragm first stage delivers superior breathing performance as you descend Ribbed diaphragm clamp adds further heat exchange performance in cold-water conditions Patented heat exchanger second stage draws in ambient warmth for a noticeably more comfortable breathe Oversized breathing effort adjuster and large purge button designed for use with gloves on Large elastomer bumpers protect the second stage from impacts and scratches Reversible second stage configures for left or right-hand gas supply Tested for octopus use to EN250A — 60 metres, cold water Nitrox/oxygen compatible up to 40% O2 Miflex BCD hose connects cleanly and reliably, flow-rate tested to EN 1809:2014 standards Choose your preferred instrument setup: keep it simple with an  SPG or add depth with a Double Console Designed and manufactured in the UK — no single-use plastic in the packaging Key Feature Highlights: Apeks MTX-R First Stage Features: Breakthrough over-moulded endcap and environmental diaphragm prevents ice build-up and protects from impact damage Ribbed diaphragm clamp for improved heat exchange in cold water Unique over-balanced diaphragm design for superior breathing performance at depth 5 medium-pressure ports (3/8" UNF) — 5th port includes a protective bumper when not in use 2 angled high-pressure ports for optimal hose routing and transmitter fitting Double swivel hose for greater freedom of movement and comfort Easy one-hand-release DIN handwheel or over-moulded yoke handwheel Suitable for cold water use below 10°C / 50°F Tested for octopus use — EN250A to 60 metres, cold water Designed and manufactured in the UK Apeks MTX-R Second Stage Features: Oversized breathing effort adjuster — easy to operate in cold water with gloves on Large self-flushing controllable purge button Large protective elastomer bumpers on the side and top for impact and scratch protection Reversible design for left or right-hand gas supply configuration Patented heat exchanger for improved cold-water breathing comfort Chrome-plated brass plate front cover with over-moulded elastomer for improved durability Comfo-bite mouthpiece for extended comfort Double swivel hose Flexible nylon braided hose for superior cold-water performance No single-use plastic in the packaging Apeks MTX-R Octopus Features: Built to the same cold-water standard as the MTX-R primary second stage Highly visible and easy to operate in emergency situations Dependable backup air source tested for use in cold water Gauge  Options Features: Miflex SPG fitted with 80cm Carbon HD hose Lightweight, compact and durable single pressure gauge Heavy- duty construction with ergonomic low- profile housing Comfortable grip and easy packing for travel Integrated attachment points at the top Supplied with durable Miflex 80cm hose Pressure gauge compliant with EN250 Miflex Double Console with Depth Gauge and SPG Compact double console with simple 1- 2 gauge layout Combines pressure gauge and depth gauge in one unit Depth gauge provides useful backup in case of dive computer issues Bright, bold and easy to read at a glance Luminescent displays for improved visibility on night dives Ergonomic low- profile housing with comfortable grip Lightweight and easy to pack for travel Depth gauge compliant with EN13319 A flexible, braided hose with standard 3/8" fitting and quick-release coupler, suitable for most BCDs, wings, and drysuits that use a standard QD connection. Every Miflex BCD hose QD fitting flow rate is tested to EN 1809:2014 . Quality Testing & Delivery Timeframe Every regulator bundle is thoroughly tested before dispatch to ensure top performance. While next-day delivery may be available at checkout, orders placed after 12PM on working days may require an additional day before shipping. If you have any questions, our friendly team is happy to help via online chat or email at support@mikesdivestore.com VIDEO CONSULTATIONS AVAILABLE: Speak to our experienced team with a live video consultation. If you’d like help choosing the right kit or the best size before you buy - or want advice on whether something you’ve purchased is the right fit - you can book a consultation appointment . Want to dive deeper into the tech behind the EVX series? Read more on our blog and discover what makes these regulators a true game-changer.